HM G2020 HD/HM G2020
ON ROAD, ALL POSITIONS
Penggunaan breaker yang lebih optimum
Kompon yang lebih tahan panas
Fitur
DESAIN TELAPAK 5-RUSUK & CONTACT PATCH OPTIMAL
Meningkatkan daya cengkram/traksi dan jarak tempuh
PENGGUNAAN KOMPON TAHAN PANAS (HEAT RESISTANCE)
Meningkatkan daya cengkram/traksi dan jarak tempuh
KONSTRUKSI KARKAS YANG LEBIH KUAT
Kemampuan menopang beban yang berlebih dan vulkanisir yang lebih tinggi
SUDUT KEMIRINGAN PADA ALUR (GROOVE) YANG LEBAR
Batu tidak mudah terselip di telapak
PERMUKAAN DAN DESAIN BAHU (SHOULDER) & DINDING SAMPING YANG OPTIMUM
Mengurangi temperatur panas pada saat ban berputar
| Posisi | Ukuran Ban | Ply Rating | Lebar Pelek (inci) | Dual Spacing Minimum (mm) | Kedalaman Tapak (mm) | Dimensi Inflasi Keseluruhan (mm) | Indeks Beban Maksimum (kg) | Rekomendasi Inflasi (psi) | ||||
| Lebar | Diameter | Lebar | Diameter | Tunggal | Ganda | Tunggal | Ganda | |||||
| All Position | 5.50-13 | 8 | 4.0 | 4.00B, 4.50B, 5.00B, 4J,4.5J, 5J | 192 | 10.1 | 151 | 662 | 610 | 580 | 62 | 62 |
| All Position | 6.40-13 | 8 | 4.0 | 4.0, 4.5 | 214 | 10.1 | 172 | 640 | 710 | 670 | 65 | 65 |
| All Position | 6.50-14 | 8 | 4.5 | 4.5J, 5J | 220 | 10.9 | 175 | 702 | 780 | 795 | 62 | 62 |
| All Position | 7.50-14 | 8 | 6.0 | 6.0, 6.5 | 266 | 10.7 | 192 | 692 | 875 | 825 | 65 | 65 |
| All Position | 7.00-15 | 10 | 5.5 | 5.5, 6.0 | 144 | 10.6 | 194 | 751 | 1080 | 1030 | 73 | 73 |
| All Position | 7.00-15 | 12 | 5.5 | 6.0, 6.5 | 228 | 10.6 | 194 | 751 | 1180 | 1120 | 83 | 83 |
| All Position | 7.50-15 | 12 | 6.0 | 5.5, 6.0 | 266 | 11.6 | 211 | 780 | 1385 | 1315 | 87 | 87 |
| All Position | 7.50-15 | 14 | 6.0 | 5.5, 6.0 | 250 | 11.6 | 211 | 780 | 1450 | 1375 | 94 | 94 |
| All Position | 7.00-16 | 10 | 5.5 | 5.5, 6.0 | 244 | 10.5 | 194 | 751 | 1075 | 1130 | 73 | 73 |
| All Position | 7.00-16 | 12 | 5.5 | 5.5, 6.0 | 244 | 10.5 | 194 | 751 | 1170 | 1230 | 93 | 83 |
| All Position | 7.00-16 | 14 | 5.5 | 5.5, 6.0 | 244 | 10.5 | 194 | 751 | 1335 | 1400 | 105 | 105 |
| All Position | 7.50-16 | 14 | 6.0 | 5.5, 6.0 | 266 | 12.3 | 211 | 805 | 1510 | 1440 | 94 | 94 |
| All Position | 7.50-16SB | 14 | 6.0 | 5.5, 6.0 | 266 | 12.3 | 211 | 805 | 1510 | 1440 | 94 | 94 |
| All Position | 7.50-16 HD | 14 | 6.0 | 5.5, 6.0 | 266 | 12.3 | 211 | 805 | 1510 | 1440 | 94 | 94 |
| All Position | 8.25-16 | 14 | 6.5 | 6.0, 6.5 | 288 | 11.2 | 234 | 854 | 1710 | 1630 | 83 | 83 |
| All Position | 9.00-20 | 14 | 7.0 | 6.5, 7.5, 7.5VM | 295 | 13.5 | 259 | 1019 | 2575 | 2300 | 110 | 100 |
| All Position | 10.00-20 | 16 | 7.5 | 7.5, 8.0, 7.5VM | 318 | 14.5 | 278 | 1054 | 3000 | 2650 | 115 | 105 |
| All Position | 10.00-20 HD | 16 | 7.5 | 7.5, 8.0, 7.5VM | 318 | 14.5 | 278 | 1054 | 3000 | 2650 | 115 | 105 |
| All Position | 11.00-20 | 16 | 8.0 | 7.5, 8.0, 8.5VM | 335 | 15.6 | 293 | 1085 | 3350 | 2900 | 115 | 105 |
| All Position | 11.00-20 HD | 16 | 8.0 | 7.5, 8.0, 8.5VM | 335 | 15.6 | 293 | 1085 | 3350 | 2900 | 115 | 105 |
| Ukuran Ban | Ply Rating | Lebar Pelek (inci) |
| 5.50-13 | 8 | |
| 6.40-13 | 8 | |
| 6.50-14 | 8 | |
| 7.50-14 | 8 | |
| 7.00-15 | 10 | |
| 7.00-15 | 12 | |
| 7.50-15 | 12 | |
| 7.50-15 | 14 | |
| 7.00-16 | 10 | |
| 7.00-16 | 12 | |
| 7.00-16 | 14 | |
| 7.50-16 | 14 | |
| 7.50-16SB | 14 | |
| 7.50-16 HD | 14 | |
| 8.25-16 | 14 | |
| 9.00-20 | 14 | |
| 10.00-20 | 16 | |
| 10.00-20 HD | 16 | |
| 11.00-20 | 16 | |
| 11.00-20 HD | 16 |